| AC voltage source | 6×120V, resolution: 100μV, maximum output power: 40VA/phase | Accuracy:0.05% |
| AC current source | 6×20A, resolution: 25μA, maximum output power: 120VA/phase | Accuracy: 0.05% |
| DC voltage source | 6×170V, resolution:100μV, maximum output power: 30VA/phase | Accuracy: 0.1% |
| DC current source | 6×10A, resolution:25μA, maximum output power:60VA/phase | Accuracy:0.1% |
| Output frequency | 0~2500Hz, resolution: 1mHz | Accuracy: 0.001Hz |
| Output phase | 0~359.999°, resolution: 0.001° | Accuracy: 0.05° |
| Output harmonic | DC component, 2~20 order harmonic | |
| Current voltage synchronization | | ＜5μs |
| Auxiliary DC output | 110V/220V DC (can switch) | |
| Small signal output | 12×(0~7.07VAC/0~10VDC), resolution: 1mV | Amplitude accuracy: 0.05% |
| phase accuracy:0.05° |
| Frequency accuracy:0.001Hz |
| Optical Ethernet interface | 6 pairs×100Mbits/s,SC,multi-mode,1310nm; | Sending dispersion: <0.1μs Receiving time accuracy: <25ns
Maximum output flow: >95M |
| IEC61850-9-1/2/LE,Goose,IEEE-1588 | 1588 time synchronization accuracy:<80ns |
| Optical serial interface | 5pairs×(2~10Mbits/s, SC, multi-mode, 850nm； | Sending dispersion:<0.1μs |
| IEC60044-7/8,FT3; support Manchester code or asynchronous serial port transmission method | Receiving time accuracy:<25ns |
| Synchronous interface | Built in GPS;1 pair×IRIG-B/PPS optical port, SC, multi-mode, 850nm | Accuracy:<1μs |
| Electrical Ethernet interface | 1pcs, RJ-45,100Mbits/s | |
| Switch input | 8 channels,10-250VDC or idle contact, auto-identifying, no polarity | |
| Switch output | 8 channels, idle contact/fast output, AC/DC breaking capability:0.5A, 250V | Fast output time:<10μs |
| Screen | 8.4” 1024×768 | |
| Power supply | AC:220V±15% frequency: 50Hz±10Hz | |
| Dimension | 360 ×200 ×415 (mm) | Weight 16.8Kg |
